BREATHER PLUGS
TCF/Z
Filling plug with breather
Filling plug with breather
Threaded plug with knurled round head for
handtightening. Hole for venting internal
pressure. For application only on upper part of
the crankcase away from moving parts.
For applications requiring extra tight sealing,
type TSFT/N is recommended.
TCF
FILLING PLUG WITH BREATHER
FILLING PLUG WITH BREATHER
Hole for venting internal pressure. For
application only on upper part of the crankcase
away from moving parts.
For applications requiring extra-tight sealing,
type TSFT/N is recommended.
TCF/F
Filling plug with breather and milled head
Filling plug with breather and milled head
Hole for venting internal pressure. The
milled head produces a crown with greater
adherence area to the crankcase. For
applications only on upper part of the
crankcase away from moving parts.
For applications requiring extra-tight
sealing, type TSFT/N is recommended.
TCFS
Filling plug and breather
Filling plug and breather
Threaded plug with hex head and with hole and a
spherical bronze filter which vent internal
pressure and keep out foreign bodies during the
intake stroke. The built-in filter has a filtration
degree of 40 microns. The TCFS is especially
suitable is dusty environments and with very
small encumbrance.
TCSF/Z
Filling plug and breather
Filling plug and breather
Threaded plug in aluminium alloy without
treatment, with knurled round head for
hand-tightening. A spherical bronze filter and the
hole diameter from 2 mm to 3 mm free vented
allow the vent of internal pressure and keep out
foreign bodies during the intake stroke. The
degree of filtration of the internal filter is shown
in the table. The TCSF/Z is therefore especially
suitable in dusty environments and is
recommended for applications on Hydraulic
Units. Available on request with anodizing treatment.
Available with gas thread from 1/4″ to 2″ and
metric thread from 14×1,5 to 33×2.
TMv
Breather plug
Breather plug
Brather plug with O-ring and external valve with
an inox spring, calibrated 0,10 to 0,15 bar. It
opens at intervals and vents internal pressure.
The valve has the double function of keeping out
foreign bodies and holding in the fluid when the
machine is turned upside down for shipping.
It is especially recommended for Differentials,
Transmissions and smll Speed Reducers.
TSFO/R
Breather plug
Breather plug
Oil filling and breather plug with galvanizedsteel
cover. Large internal chamber with O-ring
especially designed for Agricultural and Earth-
moving Machines, to be applied wherever there is
strong sloshing of the fluids
TSF
Oil filling plug with breather
Oil filling plug with breather
A galvanized steel cover and a spherical bronze
filter vent internal pressure and keep out foreign
bodies during the intake stroke. The built-in filter
has a filtration degree of 40 microns. The TSF is
therefore especially suitable in dusty
environments and is recommended for
applications on Hydraulic Units and Cylinders.
TSFA
Oil filling plug with breather
Oil filling plug with breather
A galvanized steel cover and a spherical bronze
filter vent internal pressure and keep out foreign
bodies during the intake stroke. The built-in filter
has a filtration degree of 40 microns. The TSFA is
therefore especially suitable in dusty
environments and is recommended for
applications in the motor field.
TSFT/N
Oil filling plug and breather
Oil filling plug and breather
Filling plug with free breather in aluminium alloy
without treatment with labyrinth, protected by a
galvanized-steel cover. The pressure created by
moving parts within the gearbox is vented
through the labyrinth without oil spattering.
Particularly suitable for mounting on Reduction
Gears, Geared Motors, Speed Variators and
Gearshift Boxes.Available on request with
anodizing treatment.
Available with gas thread from 1/4″ to 2″ and
metric thread from 12×1,5 to 60×4.
TSS
Breather plug with valve
Breather plug with valve
Breather plug with galvanized-steel cover and
specially-designed internal valve with an inox
spring, calibrated 0,10 to 0,15 bar, which opens
at intervals to vents internal pressure created by
fluid turbulence. Besides keeping out foreign
bodies, it lers overturning during shipment
without fluid leaking.
It is especially recommended for applications in
Speed-shift Gears, Agricultural over-Gears and
industrial Speed-Reduction Gearboxes.
PRS/F
Extension for oil with breather
Extension for oil with breather
Made of aluminium alloy, same thread for both
internal and external side, with large chamber
with labyrinth. Particularly suitable for
Agricultural, Earth Moving and Building
Machines.
TSVV
Breather plug with double valve
Breather plug with double valve
Breather plug with double valve made of
hardened and tempered light alloy. It is provided
with standard 0,10 bar calibration, which can be
adjusted by the operator depending on the
intended use. The double valve ensures venting
of internal pressure and inlet of air when the flow
medium level decreases thus hindering cavitation
on delivery.
Particularly suitable for Tanks, Oil-hydraulic
Circuits and Hydraulically Operated
Lifting Machines.
TC/V
closing plug
closing plug
Zinc-coated steel plug neutral with hex head.
Supplied without external seal.
Also available in all-threaded version.
TCEc/v
drain filling plug
drain filling plug
Zinc-coated steel conical plug with hex slot,
suitable for applications requiring minimum
protrusion. DIN 906.
TCEM/V
Magnetic oil-drain plug with hex slot
Magnetic oil-drain plug with hex slot
Zinc-coated steel plug with magnetic insert
to hold ferrous particles circulating in the oil.
Magnet with minimum protrusion, recommended
for reduced dimentions. Supplied with NBR
O-Ring. Operating temperature : -10°C + 80°C.
TCF/V
Neutral filling plug with breather
Neutral filling plug with breather
Zinc-coated steel plug with hole for
venting internal pressure. For application
only on the upper part of the crankcase,
away from moving parts. Supplied
without external seal.
Also available in all-threaded version.
TEE
Conical closing plug
Conical closing plug
Zinc-coated steel plug with external
hex and conical thread.
LSFR
Breather plug with tube
Breather plug with tube
Brass breather plug and level indicator with
specially designed internal valve calibrated to 0,
15 + 0,30 bar. It opens at intervals and it allows
venting of internal pressures created by fluid
turbulence. It is especially recommended for
applications on high-rpm speed change gears.
Supplied without external seal. Operating
temperature : -20°C + 100°C.
Upon request, available with different
calibrations and in aluminium alloy.
TSL
Filling plug with free vent
Filling plug with free vent
Brass plug protected by zinc-coated steel cover
without internal valve.Supplied without
external seal.
Upon request, available also in alluminium.
TSSR
Breather plug with valve and o-ring
Breather plug with valve and o-ring
Brass breather plug with specially-designed
internal valve calibrated to 0, 15 + 0,30 bar. It
opens at intervals and it allows venting of internal
pressures created by fluid turbulence.
Besides the advantage of not allowing the
entry of foreign bodies, allows the overturning
during shipment without any fluid leakage.
Supplied without external seal. Operating
temperature : -20°C + 100°C
Upon request, available with different
calibrations and in aluminium alloy.
TSSRC
Conical breather plug with valve and o-ring
Conical breather plug with valve and o-ring
Brass conical breather plug with specially-designed
internal valve calibrated to 0, 15 – 0,30 bar. It
opens at intervals and it allows venting of internal
pressures created by fluid turbulence. Besides the
advantage of not allowing the entry of foreign
bodies, allows the overturning during shipment
without any fluid leakage. Operating temperature:
-20°C + 100°C.
Upon request, available with different calibrations
and in aluminium alloy.